The DMC-006-002 can be used to configure up to 6 blinds, curtains or shutters and 36 push buttons (PB). Each of the shutters is controlled by a PB for raising and a PB for lowering.
Each PB has 2 functions:
• A brief press will activate lowering or raising for the time set in timer mode. A further brief press will stop the blind.
• A long press will activate lowering or raising until the blind is in the required position.
If the installation comprises 12, 18, 24 blinds, you can connect several “DMCV-006-002” cards.
The Shutter Kit allows you, using manual programming (via the 5 buttons) to operate 6 blinds, curtains or shutters from the base card and to use the following functions:
Lowering Mode: this function simulates a classic blind-lowering command.
Raising Mode: this function simulates a classic blind-raising command.
Timer Mode: this function can be used to set the blind's lowering AND raising time.
All or selective lowering mode
All or selective raising mode
Group lowering mode: management of 2 blind lowering groups.
Group raising mode: management of 2 blind raising groups.
Power: 100-240 VAC/50-60Hz.
Number of outlets available: 12 bipolar contacts with 8A of free polarity and replacable (2 contacts required per blind).
Identification module bus: 10VDC on 2 non-polarised wires.
5 buttons for programming.
Communication bus between the cards: RS485.
Size: 18 modules.
The module bus must be different from the Blind Kit bus!
Maximum 24 blinds.
DOMESTIA a division of D-TECH Electronic
rue Jean Jaurès, 176 | 4430 Ans | Belgium | Tel +32 4 372 07 16 | Fax +32 4 372 07 19 | firstname.lastname@example.org